Cubs International Petrochem Ltd.

• Company Name : Cubs International Petrochem Ltd.
• About Us : Cubs International Petrochem Ltd. is a company manufacturing cationic Bitumen Emulsion, Polymer Modified Bitumen, Warms Rubber Modified Bitumen, Tar-Felt cold mix Bitumen Emulsion with aggregates are manufactured marked and applied by us. An Asphalt Emulsion consists of three basic ingredients such as Asphalt, Water and emulsifying agents and sometimes stablisers. Emulsion are further classified on the basis of how quickly the asphalt will coalesce that is to the asphalt cement. The terms RS, MS and SS have been adopted to simplify and standarised these classification. RS is divided into RS1 and RS2 which raping setting. MS is divided to MS1 and MS2 which is medium setting and SS for slow setting Emulsion. Most cationic Emulsion contains cationic emulsifiers which are as anti-tripping agent. Emulsion are produced in high speed coalemile to make by uniformity on the emulsion. The micros scoping sized asphalt dropless are dispres in water in the presents of chemical surface active emulsifier. These cause a change in the surface lesion at the contact area betCubs International Petrochem Ltd.en the asphalt dropless and the surrounding water, and these permits the asphalt the remain in the suspended state. The particles having a similar electrical change, Repel each other, which also aids in their remaining in the suspended states. Emulsion with aggregates are applied in cold mix applications of pot hole repairing and starry seal coal mix application and its measure advantage are enclosed along with this letter. Bitumen Emulsion of roads made by CIPL is manufactured by as per 8887: 2004Polymer Modified bitumen manufactured by CIPL is made as per IS 15062: 2004 which is applied on various national highways which is a guaranty for 10 years. The term polymer simply refers to a very large molecule made by chemically reacting many (Poly) smaller molecules (Monomers) to one another in long chain or clusters. The physical properties of a specific polymer are determined by the sequence and chemical structure of the monomers from which it is made. When polymers are added to asphalt. The properties of modified asphalt depend two thing are the polymer system use and to the compatibility of the polymer is asphalt. The specific binder and mix properties can be engineered by choosing the right polymer for the application, and making sure it is compatible with the asphalt. In general ELASTOMERS are chosen to give more resilient, flexible pavement, while PLASTONERS result in mixes with higher stability and stiffness moduleGrades 6070 is made from AIR BLOWING PROCEDURE of 80100 Bitumen as maintaining a temperature between 260 and 280 c. The rehology characterized by penetration and softing point this give indication of their THERMAL SUSCEPTIBILITY and high temperature and low temperature performance. The manufacturing process has been based on blowing methods using conventional growing stillh than the Grades have been largely on what is possible and meets the best requirement of yours specified 6070 Grades Bitumen. It is made by air sparging in continue process. The reaction is EXOTHERMIC and the process is kept under controlled temperature. The materials is sampled in batches and tested for penetration, softing point and the residue time is determined on the test of the output. The result are highly depended upon the uncertain weight, the chemical composition and molecular orientation of a particulars polymer as well as the crude source, the refining process and the great of the best asphalt use.
• Product/Service :
• Country/Region : India > West Bengal
• Category : Construction & Real Estate > Bitumen
• Contact Person : Mr. Harish Poddar
• Link More : India Construction & Real Estate ,India Bitumen
• Telephone :
• Fax :
• Mobile phone :
• Address : 56, Netaji Subhas Road
• Zip Code : 700001
• Website :
• Business Type : Manufacturer